STEELBRIDGEPACKAGING

Home › Guides › How to Choose Casters

How to Choose Casters for a Cart, Dolly or Workbench

Steelbridge Packaging · October 11, 2026

Casters decide how a cart, dolly or bench actually behaves: how much it can carry, how easily it turns, how loud it is and whether it leaves marks on the floor. Picking them comes down to six questions.

1. How much weight will it carry?

Add up the heaviest load you'll ever put on it plus the weight of the cart or bench itself. Then size the casters so the load per caster stays well under each caster's rating. Floors are rarely perfectly flat, so one wheel often lifts slightly and the other wheels carry its share. Our load capacity guide walks through the math.

2. What size wheel?

Bigger wheels roll over cracks, cords, thresholds and expansion joints more easily and take less effort to push. Smaller wheels keep the cart lower and cost less.

3. What wheel material?

This matters more than most people think, because the wheel is the only thing touching your floor.

4. Swivel, rigid or a mix?

Swivel casters turn 360° so the cart can move in any direction. Rigid (fixed) casters only roll straight. Four swivels give the most maneuverability in tight spaces like hallways and elevators; two swivel plus two rigid tracks straighter on long pushes. Movers' dollies usually use four swivels.

5. Plate or stem mount?

Top-plate casters bolt through a flat steel plate (usually four holes) and are the strongest, most common mount for dollies, carts and benches. Stem casters push or thread into a hole in a leg and suit chairs, racks and light furniture. If you're building or rebuilding a dolly, a 4-bolt plate is the safe default.

6. Do you need brakes?

Brakes keep a workbench or tool chest from drifting while you work. Dollies and moving carts usually skip them, since brakes add cost and can catch on things. A common setup for benches is brakes on two of the four casters.

Quick checklist

  1. Total weight (load + cart) ÷ casters, with room to spare for uneven floors
  2. Wheel size for your floor and how far you push
  3. Wheel material for your floor: non-marking TPR for finished floors
  4. Swivel vs. rigid for how you steer
  5. Plate size and bolt pattern that fit your cart
  6. Brakes only where it needs to stay put

Steelbridge non-marking casters: 3.5" gray TPR wheels, 250 lb per caster, ball-bearing swivel, 4-bolt plate. Singles, 4-packs and 6-packs with free US shipping.

See casters & prices